Showing 65–72 of 100 results
☑ Sequential fuel injection (up to 8 cylinders)
☑ Integrated MAP sensor (4 or 7 bar)
☑ Coil-on-plug ignition
☑ Multi-spark / wasted spark
☑ Wideband Lambda sensor support Wideband lambda (via external controller)
☑ Closed-loop fuel control
☑ Knock control
☑ Boost control (PWM)
☑ Launch control
☑ Flat shift
☑ Anti-lag system
☑ Drive-by-wire throttle
☑ Idle control
☑ CAN-BUS support
☐ TCU/DSG integration
☑ Flex-fuel / Ethanol sensor
☑ Closed-loop boost
☑ Knock per cylinder
☑ Traction control
☑ Target boost on launch
☑ Water/meth injection
☑ Turbo timer
☑ Safety cuts (oil/fuel pressure)
☑ EGT input + protection (external controller)
☑ Map switching / multi maps
☑ Internal datalogging
☑ Bluetooth/WiFi/App
☑ Programmable outputs (PWM, on/off, PID)
☑Remote tuning + firmware update
☑ Sequential fuel injection
☑ Integrated MAP sensor (4 or 7 bar)
☑ Coil-on-plug ignition
☑ Multi-spark / wasted spark
☑ Wideband Lambda sensor support Wideband lambda (via external controller)
☑ Closed-loop fuel control
☑ Knock control
☑ Boost control (PWM)
☑ Launch control
☑ Flat shift
☑ Anti-lag system
☐ Drive-by-wire throttle
☑ Idle control
☑ CAN-BUS support
☐ TCU/DSG integration
☑ Flex-fuel / Ethanol sensor
☑ Closed-loop boost
☑ Knock per cylinder
☑ Traction control
☑ Target boost on launch
☑ Water/meth injection
☑ Turbo timer
☑ Safety cuts (oil/fuel pressure)
☑ EGT input + protection (external controller)
☑ Map switching / multi maps
☑ Internal datalogging
☑ Bluetooth/WiFi/App
☑ Programmable outputs (PWM, on/off, PID)
☑Remote tuning + firmware update
The RACE Pro ECU represents the pinnacle of engine and gearbox management technology. Fully developed by the PDRacing team in Greece, it’s built to deliver real-world solutions across the full range of applications — from daily performance upgrades to high-end drag racing and time attack builds.
It delivers full control, cutting-edge features, and capabilities unmatched by any other aftermarket ECU on the market, raising the bar in professional tuning and DSG gearbox integration.
✔ fuel injection 16 cylinders
✔ Coil-on-plug ignition
✔ Multi-spark / wasted spark support
✔ Wideband Lambda sensor (internal controller – Bosch LSU 4.9)
✔ Closed-loop AFR control
✔ Knock control per cylinder
✔ Boost control (gear-based PID)
✔ Launch control
✔ Flat shift (no-lift shift)
✔ Anti-lag system (ALS)
✔ Drive-by-wire (integrated DBW control)
✔ Idle control (IAC or DBW based)
✔ CAN-BUS communication (multiple channels)
DSG/TCU integration
✔ Flex-fuel / ethanol sensor support
✔ Closed-loop boost with PID logic
✔ Nitrous injection strategies
✔ Water/meth injection control
✔ Dual EGT input (with internal amplifier)
✔ Gear-based fuel, ignition & boost maps
✔ VVT/VANOS control
✔ Oil & fuel pressure safety cut
✔ EGT-based protection
✔ Map switching / multi-map support
✔ Long Term Fuel Trim (LTFT)
✔ Internal datalogging
✔ Bluetooth / WiFi connectivity
✔ USB tuning interface
✔ Custom PWM / Low-side outputs
✔ Tacho output
✔ USB firmware updates
✔ Advanced traction control
✔ Wheel speed input (per wheel)
✔ Launch target boost
✔ Real-time diagnostics
✔ Built-in 4/7 bar MAP sensor (if applicable)
✔ LIN Bus support
✔ External input/output expanders supported
The RACE Pro ECU represents the pinnacle of engine and gearbox management technology. Fully developed by the PDRacing team in Greece, it’s built to deliver real-world solutions across the full range of applications — from daily performance upgrades to high-end drag racing and time attack builds.
It delivers full control, cutting-edge features, and capabilities unmatched by any other aftermarket ECU on the market, raising the bar in professional tuning and DSG gearbox integration.
✔ fuel injection 16 cylinders
✔ Coil-on-plug ignition
✔ Multi-spark / wasted spark support
✔ Wideband Lambda sensor (internal controller – Bosch LSU 4.9)
✔ Closed-loop AFR control
✔ Knock control per cylinder
✔ Boost control (gear-based PID)
✔ Launch control
✔ Flat shift (no-lift shift)
✔ Anti-lag system (ALS)
✔ Drive-by-wire (integrated DBW control)
✔ Idle control (IAC or DBW based)
✔ CAN-BUS communication (multiple channels)
✔ DSG/TCU integration
✔ Flex-fuel / ethanol sensor support
✔ Closed-loop boost with PID logic
✔ Nitrous injection strategies
✔ Water/meth injection control
✔ Dual EGT input (with internal amplifier)
✔ Gear-based fuel, ignition & boost maps
✔ VVT/VANOS control
✔ Oil & fuel pressure safety cut
✔ EGT-based protection
✔ Map switching / multi-map support
✔ Long Term Fuel Trim (LTFT)
✔ Internal datalogging
✔ Bluetooth / WiFi connectivity
✔ USB tuning interface
✔ Custom PWM / Low-side outputs
✔ Tacho output
✔ USB firmware updates
✔ Advanced traction control
✔ Wheel speed input (per wheel)
✔ Launch target boost
✔ Real-time diagnostics
✔ Built-in 4/7 bar MAP sensor (if applicable)
✔ LIN Bus support
✔ External input/output expanders supported
The RACE Pro ECU represents the pinnacle of engine and gearbox management technology. Fully developed by the PDRacing team in Greece, it’s built to deliver real-world solutions across the full range of applications — from daily performance upgrades to high-end drag racing and time attack builds.
It delivers full control, cutting-edge features, and capabilities unmatched by any other aftermarket ECU on the market, raising the bar in professional tuning and DSG gearbox integration.
✔ fuel injection 16 cylinders
✔ Coil-on-plug ignition
✔ Multi-spark / wasted spark support
✔ Wideband Lambda sensor (internal controller – Bosch LSU 4.9)
✔ Closed-loop AFR control
✔ Knock control per cylinder
✔ Boost control (gear-based PID)
✔ Launch control
✔ Flat shift (no-lift shift)
✔ Anti-lag system (ALS)
✔ Drive-by-wire (integrated DBW control)
✔ Idle control (IAC or DBW based)
✔ CAN-BUS communication (multiple channels)
✔ DSG/TCU integration
✔ Flex-fuel / ethanol sensor support
✔ Closed-loop boost with PID logic
✔ Nitrous injection strategies
✔ Water/meth injection control
✔ Dual EGT input (with internal amplifier)
✔ Gear-based fuel, ignition & boost maps
✔ VVT/VANOS control
✔ Oil & fuel pressure safety cut
✔ EGT-based protection
✔ Map switching / multi-map support
✔ Long Term Fuel Trim (LTFT)
✔ Internal datalogging
✔ Bluetooth / WiFi connectivity
✔ USB tuning interface
✔ Custom PWM / Low-side outputs
✔ Tacho output
✔ USB firmware updates
✔ Advanced traction control
✔ Wheel speed input (per wheel)
✔ Launch target boost
✔ Real-time diagnostics
✔ Built-in 4/7 bar MAP sensor (if applicable)
✔ LIN Bus support
✔ External input/output expanders supported
At DynoKing, we specialize in manufacturing rollers for motorcycle dynamometers, offering top-tier quality and absolute reliability. We can produce any type of roller tailored to your needs, regardless of size or specifications.
Precision Technology
All our rollers are perfectly balanced to zero, ensuring flawless stability and smooth operation every time. The special surface treatment we apply optimizes grip with the tire, delivering exceptional traction without any slippage.
Zero Slippage – Maximum Performance
Thanks to our advanced design and techniques, we have completely eliminated tire spin. This ensures that every dynamometer test yields accurate and reliable results, free from distortions caused by traction loss.
DynoKing: The Ultimate Choice
DynoKing rollers are the top choice for professionals and precision enthusiasts. Our commitment to excellence and years of experience in the dynamometer field guarantee complete customer satisfaction.
Contact us to discuss your needs and let us create the ideal roller for your dynamometer.
if you want to increase the engine speed
go to the home page at the bottom left
in brain programming
send us details and file
and we will prepare it for you responsibly And for sure
